F T C      FIBER TECHNOLOGY CORPORATION  
HOME DESCRIPTION DESIGN ADVANTAGES TECHNICAL DATA HEALTH ISSUES STEEL FOOTING STEEL TOWER CONTACT US
FTC GRP PANEL TANKS
Description
Design
Technical Data
Health Issues
Steel Footing
Steel Tower
Kit Sizes
More >>
 
 
  COMPARE  ADVANTAGE
Adaptability
Corrosion
Durability
Handling & Assembly
Insulation
Leakage
Physical Properties
Repair & Maintenance
Water Quality
More >>



 
 
 

 PICTURE GALLERY
Picture Gallery
Large Tank Assembly
More >>

CONTACTS
Contact US
Feedback Form

 

FTC GRP PANEL TYPE WATER STORAGE TANKS - STEEL TOWER
 

Steel Tower
.

  • Our FTC GRP Panel type water tank can easily be installed on a Steel tower which consists of Truss or lattice type construction in a standard module, pre-welded and perforated, and designed to be loaded in container.

  • At site, those modules will require simple bolting together, to form the required steel tower.

  • All towers are designed using latest steel technology. Design criteria have been established based on internationally accepted standards for both normal (Static) and dynamic seismic loads. Local site condition factors are given careful consideration as well. The design criteria and site condition factors are tabulated below.

Design Criteria

1. Wind Velocity 60m/sec
2. Allowable Strength (Short time)  
    a) Steel (tensile)
2.4 ton/cm2 (23.5KN/cm2)
        (Japanese Standard SS41)
 
    b) Concrete (Comprehensive)
0.18 ton/cm2 (1.76KN/cm2)
    c) Anchor Bolt
 
        High Tension
10 ton/cm2 (98KN/cm2)
3. Seismic Coefficient K = 0.3G

(For more severe earthquake conditions, the factor can be increased to between 0.6G and 1.0G).

© 1999 - 2008 Fiber Technology Corporation, Inc. VA, USA